3 Ways to Remove Your Nails Nail Removal Tutorial A must see for newbies

3 Ways to Remove Your Nails

1. Tin Pack Removal Method

2. Alcohol Pack Nail Removal Method

3. Sanding Machine To Remove Nails

Tin Pack Removal Method

Tools: Cotton pads/cotton balls + nail polish remover + tin foil

Features: Sealed well wrapped tightly not easy to leakage

Time: 5~10 minutes depending on the thickness of the manicure

Note: The length of the tinfoil can be wrapped around the second knuckle, sealing tightly and impermeable to air. Ten fingers wrapped. When removing, steel push to scrape a good one and then open one. When grinding, the grinding roller along the nail surface curvature rolling type grinding do not touch the skin. One position can not be three consecutive grinding.

1、Polish the nail surface

Remove the sealer by sanding the nail surface with the nail rubbing strips and sand down to the color gel layer

2、Placement of nail polish remover pads

Dip a cotton ball or cotton pad into the nail polish remover and place it on the nail surface

3、Wrapping Nails

Wrap your fingernails in a paper wrapper to seal them tightly and keep them airtight

4、Stay 5-10 minutes

Wrap nails and wait 5-10 minutes

5、Steel Push Scraping

Open the tin and use a steel pusher to scrape off the peeling nail polish

6、Polish Nail Surface

Sponge tether polishes finely and sweeps away surface dust

7、Cotton pad cleaning

Sprinkle cotton pads dipped in alcohol to clean the nail surface

8、Completion

Alcohol Pack Nail Removal Method

Tools: Nail Removal Kit = Cotton Pads/Cotton Balls + Nail Remover + Tinfoil/Clips

Features: Individually wrapped for easy nail removal

Duration: 3~10 minutes depending on the thickness of the manicure

Note: After opening the cotton sheet on the nail surface, ten fingers wrapped Remove the steel push to scrape a finger and then remove one, ten can not be taken down at the same time, sanding the same attention to the curvature of the grinding can not be more than three consecutive times.

• Polish the nail surface

Remove the sealer by sanding the nail surface with the nail rubbing strips and sand down to the color gel layer

• Tear off the nail polish remover package

Tear off the armor removal kit and packaging transparent film along the dotted line

• Nails into the armor removal kit

Align nails with cotton pads in nail removal kit

• Stay 3-10 minutes

After wrapping the nails, wait to stay for 3-10 minutes

• Steel Push Scraping

Remove the removal kit and scrape off the nail polish with a steel pusher

• Polish Nail Surface

Sponges are finely abraded and surface dust is swept away

• Cotton pad cleaning

Alcohol cotton pads dipped in alcohol to clean whole nails

• Completion

Sanding Machine To Remove Nails

Tools: Sanding machine + sanding head

Features: Fast removal speed, high hardness, time and labor-saving

Note: Adjust the direction of the sander first.F RPM is generally 10~25 there is no absolute. The faster the rotational speed, the faster the beating head in the nail surface gliding speed should also be fast, the same frequency rotational speed is too low will be shocked, will also have the feeling of beating not moving. Use your little finger as a support point more stable sanding head and nail surface parallel force should be uniform. Sanding in their own direction, not to pause in the same place, will lead to nail surface sanding too deep or pits. A little bit of residual glue can be left to prevent over-sanding and injury to the nail.

• Polish the nail surface (parallel to the nail surface, back to front)

Sanding both sides vertically in the middle horizontally, the trailing edge curved, not too long in one part of the sanding

• Sanding residual glue

Scrub the nail surface with a fine surface to make the nail surface flat

• Polish Nail Surface

Sponges are finely abraded and surface dust is swept away

• Cotton pad cleaning

Alcohol cotton pads dipped in alcohol to clean whole nails

• Completion